class methods
- ofDirectory()
- allowExt()
- begin()
- canExecute()
- canRead()
- canWrite()
- close()
- copyTo()
- create()
- createDirectory()
- doesDirectoryExist()
- end()
- exists()
- getAbsolutePath()
- getFile()
- getFiles()
- getName()
- getOriginalDirectory()
- getPath()
- getShowHidden()
- getSorted()
- isDirectory()
- isDirectoryEmpty()
- isHidden()
- listDir()
- moveTo()
- open()
- openFromCWD()
- operator!=()
- operator
- operator<=()
- operator==()
- operator>()
- operator>=()
- operator[]()
- path()
- rbegin()
- remove()
- removeDirectory()
- renameTo()
- rend()
- reset()
- setExecutable()
- setReadable()
- setShowHidden()
- setWriteable()
- size()
- sort()
- sortByDate()
ofDirectory is a class for reading and manipulating directories on the file system through openFrameworks.
Here is a common way to use it:
//some path, may be absolute or relative to bin/data
string path = "/my/path/file";
ofDirectory dir(path);
//only show png files
dir.allowExt("png");
//populate the directory object
dir.listDir();
//go through and print out all the paths
for(int i = 0; i < dir.size(); i++){
ofLogNotice(dir.getPath(i));
}
Documentation from code comments
Path to a directory. Can be used to query file and directory contents.
ofDirectory()
ofDirectory::ofDirectory()
Constructs an empty directory object.
Documentation from code comments
Create an ofDirectory instance
Does not refer to a specific directory until you either open or create a directory path.
ofDirectory(...)
ofDirectory::ofDirectory(const filesystem::path &path)
Constructs a directory object and calls open() on the provided path. The contents of the path are not accessible until listDir() is called.
Documentation from code comments
Create an ofDirectory instance and attempt to open the path.
Parameters:
path directory path
allowExt(...)
void ofDirectory::allowExt(const string &extension)
Adds an allowed extension to the list of filters when listing directories. Use this to set any number of filters before calling listDir().
For example if you wanted to only get images in a directory, you may set several filters:
string path = "/path/to/images";
ofDirectory dir(path);
dir.allowExt("png");
dir.allowExt("jpg");
dir.allowExt("gif");
dir.listDir();
Documentation from code comments
Allow a file extension when listing the contents the current directory path.
Setting an allowed extension enables a whitelist mode which only lists extensions which have been explicitly allowed.
Parameters:
extension file type extension ie. "jpg", "png", "txt", etc
canExecute()
bool ofDirectory::canExecute()
Returns true if the current directory is executable. An executable directory can be entered into with command such as cd.
Documentation from code comments
Check if the current path is executable.
Returns: true if executable
canRead()
bool ofDirectory::canRead()
Returns true if the open directory can be read.
Documentation from code comments
Check if the current path is readable.
Returns: true if readable
canWrite()
bool ofDirectory::canWrite()
Returns true if the open directory can be written to.
Documentation from code comments
Check if the current path is writeable.
Returns: true if writable
close()
void ofDirectory::close()
Closes the directory.
Documentation from code comments
Close the currently open path.
copyTo(...)
bool ofDirectory::copyTo(const filesystem::path &path, bool bRelativeToData=true, bool overwrite=false)
Copies the directory into path. If bRelativeToData is set to false then path should be absolute. If overwrite is set to true any existing files with the same name will be overwritten by the copy.
Documentation from code comments
Copy the current file or directory path to a new path.
Copies relative to the data path & does not overwrite by default does not change the current path & assumes the new path is in the data directory.
Parameters:
path destination file or directory path
bRelativeToData set to false if you are working with paths that are not in the data directory
overwrite set to true if you want to overwrite the file or directory at the new path
Returns: true if the copy was successful
create(...)
bool ofDirectory::create(bool recursive=false)
Creates the directory if it doesn't exist already. A common reason to use create is to ensure that you are able to write files to a known path, like so
string path = "/path/to/file";
ofDirectory dir(path);
if(!dir.exists()){
dir.create(true);
}
//now you can be sure that path exists
The recursive boolean flag will indicate if you'd like to create directories all the directories required to reach the given path. In our example, if "/path/to" didn't already exist, the call to create() would also create these. If recursive were set to false, the directory would not be created.
Documentation from code comments
Create a directory at the current path.
Parameters:
bRecursive set to true to automatically create nested directories as required
createDirectory(...)
bool ofDirectory::createDirectory(const filesystem::path &dirPath, bool bRelativeToData=true, bool recursive=false)
Static method to create a directory at a given path.
Documentation from code comments
Create a directory at a given path.
Creates relative to the data path by default.
Parameters:
dirPath directory path
bRelativeToData set to false if you are working with paths that are not in the data directory
bRecursive set to true to automatically create nested directories as required
Returns: true if directory was created successfully
doesDirectoryExist(...)
bool ofDirectory::doesDirectoryExist(const filesystem::path &dirPath, bool bRelativeToData=true)
Returns true if the directory at dirPath exists.
Documentation from code comments
Check if a directory exists at a given path.
Assumes directory path is relative to the data path by default.
Parameters:
dirPath directory path
bRelativeToData set to false if you are working with paths that are not in the data directory
Returns: true if the directory exists
exists()
bool ofDirectory::exists()
Returns true if the open directory exists. Great to be used in conjunction with ofDirectory::create()
Documentation from code comments
Check if a directory exists at the current path.
Returns: true if exists
getAbsolutePath()
string ofDirectory::getAbsolutePath()
Documentation from code comments
Get the absolute, full path of the directory, ie. "images" -> "/Users/mickey/of/apps/myApps/Donald/bin/data/images".
\return current path as an absolute path
getFile(...)
ofFile ofDirectory::getFile(size_t position, ofFile::Mode mode=Reference, bool binary=true)
Documentation from code comments
Open an ofFile instance using the path a given position in the directory contents list.
Opens as a binary file with readonly access by default.
Warning: Call listDir() before using this function or the directory contents list will be empty. \throw Throws an out of bounds exception if position >= the number of listed directory contents.
Parameters:
position array index in the directory contents list
mode file access mode depending on how you plan to use the file (read only, read write, etc)
binary set to false if you are working with a text file & want lines split at endline characters automatically
Returns: ofFile instance
getFiles()
const vector< ofFile > & ofDirectory::getFiles()
Returns a vector of ofFile objects populated by a prior call to listDir(). The files are opened in ofFile::Reference mode.
Documentation from code comments
Get files and directories in the directory contents list.
Directory contents are automatically listed.
Returns: vector of files in the directory
getName(...)
string ofDirectory::getName(size_t position)
Returns the file name,(eg "mypicture.png") with extension but not the enclosing path at a given index. Position must be less than the result of numFiles().
Documentation from code comments
Get the filename at a given position in the directory contents list, ie. "duck.jpg".
Warning: Call listDir() before using this function or the directory contents list will be empty. \throws Throws an out of bounds exception if position >= the number of listed directory contents.
Parameters:
position array index in the directory contents list
Returns: file or directory name
getOriginalDirectory()
string ofDirectory::getOriginalDirectory()
Documentation from code comments
Returns: the current path
getPath(...)
string ofDirectory::getPath(size_t position)
Returns the absolute path,(eg "/path/to/files/mypicture.png"). Position must be less than the result of size().
Documentation from code comments
Get the full path of the file or directory at a given position in the directory contents list.
Warning: Call listDir() before using this function or the directory contents list will be empty. \throws Throws an out of bounds exception if position >= the number of listed directory contents.
Parameters:
position array index in the directory contents list
Returns: file or directory name including the current path
getShowHidden()
bool ofDirectory::getShowHidden()
Returns if hidden files are set to be shown or not.
Documentation from code comments
Check whether hidden files & directories are included when listing files.
Mac & Linux denote hidden directories by prepending a period -> ".hello".
Returns: true if hidden files are shown
getSorted()
ofDirectory ofDirectory::getSorted()
Documentation from code comments
Get a sorted ofDirectory instance using the current path.
Returns: sorted ofDirectory instance
isDirectory()
bool ofDirectory::isDirectory()
Returns true if the given path is actually a directory.
Documentation from code comments
Check if the current path is indeed a directory and not a file.
Returns: true if a directory
isDirectoryEmpty(...)
bool ofDirectory::isDirectoryEmpty(const filesystem::path &dirPath, bool bRelativeToData=true)
Returns true if the directory at dirPath is empty.
Documentation from code comments
Check if a directory at a given path is empty.
Assumes directory path is relative to the data path by default.
Parameters:
dirPath directory path
bRelativeToData set to false if you are working with paths that are not in the data directory
Returns: true if the directory is empty aka contains no files or directories
isHidden()
bool ofDirectory::isHidden()
Returns true if the directory is hidden in the file system.
Documentation from code comments
Check if the current path is hidden.
Works on Mac & Linux which denote hidden directories by prepending a period -> ".hello", however always returns false on Windows.
Returns: true if hidden
listDir()
size_t ofDirectory::listDir()
Populates the directory with files. Call this after opening a directory and setting filters. After this call, size(), getPath(position), and getName(position) can be used to access the contents of the directory.
Documentation from code comments
Open and read the contents of the current directory.
Uses allowed extension whitelist to ignore unwanted file types if allowExt() has been called.
Returns: number of paths found
listDir(...)
size_t ofDirectory::listDir(const string &path)
Opens and populates the directory with files. Returns the number of files found.
Documentation from code comments
Open and read the contents of a directory.
Uses allowed extension whitelist to ignore unwanted file types if allowExt() has been called.
Parameters:
path directory path
Returns: number of paths found
moveTo(...)
bool ofDirectory::moveTo(const filesystem::path &path, bool bRelativeToData=true, bool overwrite=false)
Moves the directory into another directory at path. If bRelativeToData is set to false then path should be absolute. If overwrite is set to true any existing files with the same name will be overwritten by the move.
Documentation from code comments
Move the current file or directory path to a new path.
Moves relative to the data path & does not overwrite by default does not change the current path & assumes the new path is in the data directory.
Parameters:
path destination file or directory path
bRelativeToData set to false if you are working with paths that are not in the data directory
overwrite set to true if you want to overwrite the file or directory at the new path
Returns: true if the copy was successful
open(...)
void ofDirectory::open(const filesystem::path &path)
Opens a path. At this point you can see if the directory exists by calling exists() but the contents of the path are not accessible until listDir() is called.
Documentation from code comments
Open a directory path, clears the current file list.
Parameters:
path directory path
openFromCWD(...)
void ofDirectory::openFromCWD(const filesystem::path &path)
Documentation from code comments
Open a directory path relative to the current working directory without calling ofToDataPath internally, clears the current file list.
Parameters:
path directory path
operator!=(...)
bool ofDirectory::operator!=(const ofDirectory &dir)
Returns true if this directory and another have different paths.
operator
bool ofDirectory::operator
Returns true if the right hand side directory is alphabetically after the left hand side directory.
Returns true if the right hand side directory is alphabetically after the left hand side directory.
operator<=(...)
bool ofDirectory::operator<=(const ofDirectory &dir)
Returns true if the right hand side directory is alphabetically after or equal to the left hand side directory.
operator==(...)
bool ofDirectory::operator==(const ofDirectory &dir)
Returns true if this directory and another have the same path.
operator>(...)
bool ofDirectory::operator>(const ofDirectory &dir)
Returns true if the left hand side directory is alphabetically after the right hand side directory.
operator>=(...)
bool ofDirectory::operator>=(const ofDirectory &dir)
Returns true if the left hand side directory is alphabetically after or equal to the right hand side directory;
operator[](...)
ofFile ofDirectory::operator[](size_t position)
Operator for accessing files with array notation syntax. Call is equivalent to ofFile::getFile(position).
Documentation from code comments
Access directory contents via th array operator.
Warning: Call listDir() before using this function or the directory contents list will be empty. \throw Throws an out of bounds exception if position >= the number of listed directory contents.
Parameters:
position array index in the directory contents list
Returns: opened ofFile instance
path()
string ofDirectory::path()
Returns the currently opened path.
Documentation from code comments
Get the current path.
Returns: current path
remove(...)
bool ofDirectory::remove(bool recursive)
Deletes the directory. If recursive is set to false and this directory contains others the remove will fail.
Documentation from code comments
Removes the file or directory at the current path.
Does not remove non-empty directories by default.
Warning: Be careful! This deletes a file or folder. :)
Parameters:
recursive set to true to remove a non-empty directory and its contents
Returns: true if the path was removed successfully
removeDirectory(...)
bool ofDirectory::removeDirectory(const filesystem::path &path, bool deleteIfNotEmpty, bool bRelativeToData=true)
Removes a directory. If deleteIfNotEmpty is set to false and the directory contains files the call will fail.
Documentation from code comments
remove a directory at a given path
Parameters:
deleteIfNotEmpty set to true if you want to recursively delete the directory and its contents
bRelativeToData set to false if you are working with paths that are not in the data directory
Returns: true if the path was removed successfully
renameTo(...)
bool ofDirectory::renameTo(const filesystem::path &path, bool bRelativeToData=true, bool overwrite=false)
Renames the directory to the path path. If bRelativeToData is set to false then path should be absolute. If overwrite is set to true any existing files with the same name will be overwritten by the rename.
Documentation from code comments
Rename the current file or directory path to a new path.
Renames relative to the data path & does not overwrite by default does not change the current path & assumes the new path is in the data directory.
Parameters:
path destination file or directory path
bRelativeToData set to false if you are working with paths that are not in the data folder
overwrite set to true if you want to overwrite the file or directory at the new path
Returns: true if the copy was successful
reset()
void ofDirectory::reset()
Resets the current directory. Equivalent to close().
Documentation from code comments
Closes the directory.
This is for backwards compatibility with ofxDirList.
setExecutable(...)
void ofDirectory::setExecutable(bool executable=true)
Enables or disables execution on the current open directory. If the directory is executable then it can be entered through commands such as cd.
Documentation from code comments
Set the executable flag of the current path.
Parameters:
executable set to true to make path executable
setReadable(...)
void ofDirectory::setReadable(bool readable=true)
Documentation from code comments
Set the readable flag of the current path.
Parameters:
readable set to true to make path readable
setShowHidden(...)
void ofDirectory::setShowHidden(bool showHidden)
Sets whether or not the call to listDir() will return hidden files.
Documentation from code comments
Show hidden files & directories when listing files?
Mac & Linux denote hidden directories by prepending a period -> ".hello".
Parameters:
showHidden set to true to show hidden files
setWriteable(...)
void ofDirectory::setWriteable(bool writeable=true)
Enables or disables writeable on the current open directory.
Documentation from code comments
Set the writable flag of the current path.
Parameters:
writable set to true to make path writable
size()
size_t ofDirectory::size()
Returns the number of files contained within the directory. Set after listDir() is called.
Documentation from code comments
Get the number of paths in the current directory list.
Warning: Call listDir() before using this function or it will return 0 since the directory list will be empty.
Returns: number of paths
sort()
void ofDirectory::sort()
Sorts the contents of the directory by filename.
Documentation from code comments
Sort the directory contents list alphabetically.
Warning: Call listDir() before using this function or there will be nothing to sort.
sortByDate()
void ofDirectory::sortByDate()
Documentation from code comments
Sort the directory contents list by date.
Warning: Call listDir() before using this function or there will be nothing to sort.
Last updated 土曜日, 17 8月 2024 20:48:05 UTC - 99bfb4fd7929e233b87b05758efc36f91505592e
If you have any doubt about the usage of this module you can ask in the forum.
If you want to contribute better documentation or start documenting this section you can do so here
If you find anything wrong with this docs you can report any error by opening an issue